This is ONLY the DISPLAY and can only be used with
Load regulator Sun / wind TriStar TS-45, 45A 12/24 / 48V
Load regulator Sun / wind TriStar TS-60, 60A 12/24 / 48V
Load regulator Sun / wind TriStar TS-30, 30A 12/24 / 48V
Charger TriStar MPPT-45, 45A 12/24 / 48V
Charger TriStar MPPT-60, 60A 12/24 / 48V
Charger TriStar MPPT-30, 30A 12/24 / 48V
It shows an overview of operations and historical values. The complete configuration of the controller is set on the display.
Display: Battery voltage, battery temperature (only if you use sensor cable for battery temperature sensor), load current, daily load in watts, etc., so you have everything in sight.
In conjunction with a TriStar charger controller, it is possible to connect to two instrument measurement data. Both can be remote display, or one can be an external monitor and the other a local display.
At the first push of one of the four buttons, the backlight turns on. The backlight should remain for 5 minutes after the last push of a button.
The digital meter is used only in conjunction with the TriStar controller.
Technical details:
* Power consumption: 7.5 mA (without lighting)
* Power consumption: 42.5 mA with backlighting
Dimensions: 116 x 116mm
* Operating temperature: -40 ° C to +60 ° C
* LCD Temperature range: -20 ° C to +70 ° C
* Moisture: 5-95% (no condensation)
* Double Layer (both sides) in all circuits
Contents:
* TriStar Digital Meter TS-45 and TS-60
* Cable connection