Description
Victron SmartSolar solar charger MPPT 100/15 Bluetooth is the wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
– VE.Direct
– Bluetooth Smart built-in: dongle not needed
Consumption output: 15A
Voltage from solar cells: max: 100V
Max current for the battery: 15A
Max solar power at 12V: 210W
Max solar power at 24V: 420W
Battery voltage : 12/24V automatic detection
Battery life: intelligent battery management.
Bluetooth integrated, no Bluetooth Smart Dongle needed anymore.
The wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices.
For a wired data connection to a Color Control panel, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast
MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset
voltage.Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.
Battery Life: intelligent battery managementWhen a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead -acid battery within weeks or months.
The Battery
Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load
disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%.
From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is
achieved about once every week
