All-in-one solar power solution: The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure.
The product is easy to install, with a minimum of wiring.
The solar charge controller: Blue Solar MPPT 100/50
Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40
The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.
AC distribution: The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A
One 16A output is controlled by the AC input: it will switch on only when AC is available.
Transfer switch 16 A
Invert input voltage range 19-33 V
High output AC 0 16 A
Output AC 1, 2, 3
Output voltage: 230 V AC +/- 2% Frequency: 50 Hz +/- 0.1%
Forts. Output power at 25 ° C 1600 VA / 1300 W
Forts. Output power at 40 ° C 1200 W
Peak power 3000 W
Max. Efficiency 92%
No Load Power 8 W
Zero load current in search mode 2 W
Charges AC input
Input voltage range: 187-265 VAC
Input frequency: 45-65 Hz Power factor: 1
Constant ‘charging voltage 28.8
Erhaltung ‘loading voltage 28.8
Storage condition 26.4
Charge current house battery 40 A
Charge current starter battery 4 A
Battery temperature sensor Yes
Programmable relay Yes
Solar Charge Controller
Maximum output current 50 A
Maximum PV power 1400 W
Maximum PV idle voltage 75 V
Max. Efficiency 98%
Power consumption 10 mA
Constant charge voltage 28.8 V standard
Erhaltung’s “charging voltage, standard setting 27.6 V
Ladealgolfrithmus Multi-stage, adaptive
Temperature compensation -16 mV / ° C and -32 mV / ° C