Victron BatteryProtect 48V – 100A

136,00 Incl. Tax

Dimensions:  62 x 123 x 120 mm
For 48V Batt, max 100A

Delivery: 2-4 days from Germany


The BatteryProtect disconnects the battery from non-essentialloads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages.
The seven segment display will indicate which setting has been chosen.A special setting for Li-ion batteries. In this mode the Battery Protect can be controlled by the VE.Bus BMS.
Ultra-low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64 V.
Ignition proof
No relays but MOSFET switches, and therefore no sparks

Specifications Model BP48-100
Max. Continuous load current 100A
Peak load 250A
Operating voltage range 24-64V
Self-Use 2mA (When On), 0.8mA (When Off or Low Voltage)
Operating temperature -40 ° C to + 40 ° C
Connection M8
Weight 0.8 kg
Dimensions (H x W x D) 62 x 123 x 120 mm

Additional information

Weight 1 kg

You may also like…