Description
The OutBack Power Systems FW-IOB allow manual switching between the FX Series Inverter/Charger and a second AC source, facilitating maintenance and power continuity.
About OutBack Power Systems
OutBack Power Systems is a leader in advanced energy conversion technology. Products include true sine wave inverter/chargers, a maximum power point charge controller, system communication components, as well as breaker panels, breakers, accessories, and assembled systems.
Requirements and Warnings
The OutBack FW-IOB is intended as a system component and is included in a listing by ETL as indoor enclosures to UL standard UL 508A Industrial Control Panels.
This enclosure is intended for battery circuits configured for 12 to 48 volts nominal.
Grounding Instructions – Each enclosure should be connected to a grounded, permanent wiring system. For most installations, the negative battery conductor should be bonded to the grounding system at one (and only one) point in the DC system. All installations must comply with all national and local codes and ordinances. System grounding as required by the National Electric Code, ANSI /NFPA 70-1996, is the responsibility of the system installer.
Select model, no. of phases, voltage:
– FW-IOB-T-230/400VAC 3Phase
Triple inverter input-output-bypass for FW1000-230/400VAC output 30 amp 20.7kW includes nine 30A, 230 VAC single pole DIN mount breakers
– FW-IOB-T-120/208VAC 3Phase
Triple inverter input-output-bypass for FW1000-120/208VAC output 60 amp 21.6kW includes nine 60A,120 VAC single pole DIN mount breakers
– FW-IOB-Q-230VAC
Quadruple inverter input-output-bypass for FW1000-230VAC output 120amp 27.6kW includes twelve 30A, 230 VAC single pole DIN mount breakers
– FW-IOB-Q-120/240VAC
Quadruple inverter input-output-bypass for FW1000-120/240VAC output 120 amp 28.8kW includes twelve 60A,120 VAC single pole DIN mount breakers
– FW-IOB-D-230VAC
Dual inverter input-output-bypass for FW500 – 230VAC output 60 amp 13.8kW. Includes six 30A,230 VAC single pole DIN mount breakers.
– FW-IOB-D-120/240VAC
Dual inverter input-output-bypass for FW500 – 120/240VAC output 60 amp 14.4kW. Includes six 60A,120 VAC single pole DIN mount breakers.
– FW-IOB-S-230VAC
Single inverter input-output-bypass for FW 250 only – 230VAC output 30 amp 6.9kW. Includes three 30A, 230 VAC single pole panel mount breakers
– FW-IOB-S-120VAC
Single inverter input-output-bypass for FW 250 only – 120VAC output 60 amp 7.2kW. Includes three 60A,120 VAC single pole panel mount breakers.
